Technical Specifications; Dimension - Marantz SR6009/U1B Service Manual

TECHNICAL SPECIFICATIONS

n Audio section
• Power amplifier
Rated output :
Front :
110W+110W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.)
150W+150W(6Ω, 1kHz with 0.7% T.H.D)
Center :
110W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.)
150W(6Ω, 1 kHz with 0.7 % T.H.D.)
Surround :
110W+110W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.)
150W+150W(6Ω, 1 kHz with 0.7 % T.H.D.)
Surround back:
110W+110W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.)
150W+150W(6Ω, 1 kHz with 0.7 % T.H.D.)
Output connectors : 4 - 16Ω
n Analog section
Input sensitivity/Input impedance : 200 mV/47 kΩ
Frequency response : 10 Hz - 100 kHz — +1, -3 dB(Direct mode)
S/N : 100 dB(IHF-A weighted, Direct mode)
Distortion : 0.005 % (20 Hz – 20 kHz) (Direct mode)
Rated output : 1.2 V
n Digital section
D/A output : Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input : Format — Digital audio interface
n Phono equalizer
Input sensitivity : 2.5 mV
RIAA deviation : ±1 dB (20 Hz to 20 kHz)
S/N : 74 dB (IHF-A)
Distortion factor : 0.03 % (1 kHz, 3 V)
n Video section
• Standard video connectors
Input/output level and impedance : 1 Vp-p, 75 Ω
Frequency response : 5 Hz - 10 MHz — 0, -3 dB
• Color component video connector
Input/output level and impedance : Y signal — 1 Vp-p, 75 Ω
Frequency response : 5 Hz - 60 MHz — 0, -3 dB

DIMENSION

Unit： in. (mm) Weight： 25 lb 2 oz (11.4 kg)
1 31/32 (50)
PB / CB signal — 0.7 Vp-p, 75 Ω
PR / CR signal — 0.7 Vp-p, 75 Ω
17 21/64 (440)
13 25/64 (340)
n Tuner section
Reception frequency range : FM 87.5 MHz - 107.9 MHz(for E3)
Effective sensitivity : FM 1.2μV(12.8dBf)
AM 18 μV
50 dB sensitivity : MONO ― 2.8 μV (20.2 dBf)
S/N: MONO ― 70 dB (IHF-A weighted, Direct mode)
STEREO ― 67 dB (IHF-A weighted, Direct mode)
Distortion : MONO ― 0.7 % (1 kHz)
SRETEO ― 1.0 % (1 kHz)
n Wireless LAN section
Network type
(wireless LAN standard): Conforming to Wi-Fi®z1
Security : WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency : 2.4 GHz
No. of channels : 1 - 11 ch (for E3)
1 - 13 ch (for E2, E1C)
z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product
Logo are registered trademarks of the Wi-Fi Alliance.
n Bluetooth section
Communications system : Bluetooth Version 2.1 + EDR
Transmission power : Maximum 2.5 mW (Class 2)
Maximum communication range : Approx. 32.8 ft/10 m in line of sight
Frequency band : 2.4 GHz band
Modulation scheme : FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles : A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.4 (Audio Video Remote Control Profile)
Corresponding codec : SBC, AAC
Transmission range (A2DP) : 20 Hz - 20,000 Hz
n General
Power supply : (for E3) :
(for E2) :
(for E1C) :
Power consumption : 650W
Power consumption in standby mode : 0.2W
Power consumption in CEC standby mode : 0.5W
Power consumption in network standby mode : 2.7W
For purposes of improvement, specifications and design are subject to
change without notice.
2 11/64
(55)
1 31/32(50)
9
FM 87.5 MHz - 108.0 MHz(for E2, E1C)
AM 520 kHz - 1710 kHz(for E3)
AM 522 kHz - 1611 kHz(for E2, E1C)
(Enhanced Data Rate)
AC 120 V, 60 Hz
AC 230 V, 50 Hz / 60Hz
AC 220 V, 50 Hz