Asko D5233 Use & Care Manual page 24

Hide thumbs Also See for D5233:
Table of Contents

Advertisement

Setting a signal
If you want the machine to signal when the wash is complete, you can program it to do this.
The machine is set without a signal by default.
1.
2.
3.
PROG
PROG
4.
START
STOP
or Reset
1.
2.
3.
PROG
PROG
START
4.
STOP

Switch off the dishwasher at the main switch.
Hold in the Delayed start button at the same time as you press the
main switch. The button flashes. Release the button.
Press the Program button – when the Auto wash symbol lights, the
signal is activated.
Press the Start/Stop button and the setting will be stored until next
time you want to make a change.
Switch off the dishwasher with the main switch.
Hold in the Delayed start button at the same time as you press the
main switch. The button flashes. Release the button.
Press the Program button – when the Auto wash symbol goes out, the
signal is deactivated.
Press the Start/Stop button and the setting will be stored until next
time you want to make a change.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents