Asko D5233 Use & Care Manual page 15

Press Start/Stop
The dishwasher will now start. It manages
the entire wash automatically. Ensure that
the door is properly closed or the machine
will not start.
Changing options
If you want to change program after having
started the machine, press the Start/Stop
button for three seconds. Then select a new
program and then press the Start/Stop but­
ton again.
Do you want to load more dishes?
Carefully open the door; the machine will
stops automatically, put in the dishes, close
the door and the dishwasher will continue
from where it left off.
If the machine is switched off from
the main switch
(or in the event of a power cut) before the
washing program has been completed,
the interrupted program will continue when
power comes back on.
NB!
If the power is switched off, or if the door is
open for more than 2 minutes during drying,
the program isinterrupted.
7
After dishwashing
Once the machine has finished, it only
draws standby current. Turn off the water
faucet if the machine is not to be used for an
extended period, such as during vacations,
for example.
Drying
For additional drying the door should be
opened 35 mm upon completion of the dry­
ing cycle. For more information refer to the
page marked Performance Information in
these instructions.
1