Carrier Alarko 6 Instruction Manual page 35

If you need to add anti-freeze and water mixture into motor:
1. Charge motor with the mixture with a water filler (Figure 3). The content
of the mixture is explained below.
2. Wait for 30 minutes before taking the water filler out. By this time any
36
36
air bubbles will be dispelled. Then add some more mixture up to the
top.
3. Tightly secure the plug on its place.
4. Check whether there is any leakage in the motor casing.
!
Use of protective gloves and glasses are recommended when
filling the anti-freeze.
!
Use of protective gloves and glasses are recommended when filling the
Freezing temperatures of changing mixture rates of water and anti-freeze
!
anti-freeze.
Use of protective gloves and glasses are recommended when filling the
(1,2 propylene glycol) are shown below:
anti-freeze.
Freezing point
ºC
Freezing point
-10
ºC
-15
-10
-20
-15
-25
-20
-30
-25
Values in the above table are valid only for the product Glyco-Shell of the Shell
Values in the above table are valid only for the product Glyco-Shell of the
-30
company. Please consult producers for alternative products. 1,2 propylene glycol
Shell company. Please consult producers for alternative products. 1,2 propy-
is available in the market under the following brand names.
Values in the above table are valid only for the product Glyco-Shell of the Shell
lene glycol is available in the market under the following brand names.
company. Please consult producers for alternative products. 1,2 propylene glycol
Producer
is available in the market under the following brand names.
Basf
Shell
Producer
Shell
Basf
Shell
The table below shows approximate amounts of anti-freeze and water mixture to
be used for different motor types and motor rates.
Shell
Motor Type
The table below shows approximate amounts of anti-freeze and water mixture to
The table below shows approximate amounts of anti-freeze and water
be used for different motor types and motor rates.
mixture to be used for different motor types and motor rates.
AL 6"
Motor Type
AL 8"
AL 6"
AL 10"
1,2 Propylene Glycol
Weight %
1,2 Propylene Glycol
18
Weight %
25
18
32
25
37
32
41
37
41
Brand Name
Glythermin P44
Glyco-Shell SF
Brand Name
Glyco-Shell
Glythermin P44
Glyco-Shell SF
Glyco-Shell
Motor Rate
HP
4 - 10
Motor Rate
15 - 50
HP
40 - 75
4 - 10
95 - 100
15 - 50
110 - 180
Water
Weight %
Water
82
Weight %
75
68
63
59
Name of producers in the table are
alphabetically listed. It does not
express any preference.
Name of producers in the
table are alphabetically lis-
Name of producers in the table are
ted. It does not express any
alphabetically listed. It does not
express any preference.
preference.
Appr. Amount of Mixture
Lt
3 - 4
Appr. Amount of Mixture
4,5 - 5,5
8,5 - 9,5
3 - 4
12 - 12,5
4,5 - 5,5
17 - 17,5
35
82
75
68
63
59
Lt