Table of Contents
Advertisement
Functions
OPERATING YOUR 2IN1
DEHUMIDIFIER WITH AIR
PURIFICATION
1. Press the
button to turn on.
2. The unit will default to Auto mode on
first use and will remember the last used
function thereafter.
3. To revert back to default mode, unplug the
unit from the mains power.
PRESET OPERATING MODES
There are 4 preset operating modes. To toggle
between each mode, press the
The light above the chosen operating mode
will flash 5 times, then illuminate solid when
selected.
Auto (Dehumidification)
• Auto operates to dehumidify the air to reach
the last set humidity level, allowing for more
control based on preference.
• Once the humidity level is reached,
dehumidification will stop and the fan will
continue to operate.
• If the humidity is still below the preset
humidity after 3 minutes, the fan will stop.
• Dehumidification will resume if the room
humidity level becomes higher than the
preset humidity.
• In Auto mode, the fan speed can be adjusted
to either High or Low, however High will
deliver the ideal humidity level quicker.
• In Auto mode, the humidity level can be
adjusted based on preference.
Continuous (Dehumidification)
• Continuous operates on a Low fan speed
until manually switched off.
• The fan speed and humidity level cannot be
adjusted on continuous mode.
• Laundry mode assists to dry indoor hanging
clothes faster by drawing out the moisture.
• Laundry mode automatically operates on a
High speed and low humidity (30%).
• Purify operates automatically when
operating any dehumidification mode to filter
the air before returning to the surrounding
environment.
• Purify can also be used alone to filter and
deliver cleaner air at any time, without
button.
dehumidification.
• The fan speed can be adjusted to High or Low
in Purify mode.
This 2in1 Dehumidifier produces heat during
operation which may cause room temperatures
to rise by 1°C to 4°C, especially if used in an
enclosed space.
Night
• The Night feature turns off all the lights on
the unit to assist with sleeping, even though
the unit may remain operating.
• To activate the Night feature, press and hold
the
• All lights will turn off, the light above the
• To exit Night, press and hold the
for 3 seconds.
Fan speed can be adjusted manually in Auto
and Purify modes only.
1. Press the
or High. The light will illuminate under the
selected speed.
• Laundry mode is defaulted to high speed.
• Continuous mode operates on low fan speed.
Laundry (Dehumidification)
Purify
NOTE
button for 3 seconds.
icon will flash 3 times, then turn off.
Fan Speed
button to select between Low
button
11
Advertisement
Table of Contents
