Download Print this page

Functions - Breville Toast & Melt LSG525 Instruction Book

Sandwich press

Advertisement

Functions

BEFORE FIRST USE
Remove any promotional materials and
packaging materials before use. Check that
the cooking plates are clean and free of dust.
If necessary, wipe over the plates with a damp
cloth.
HEIGHT-ADJUSTABLE CONTROL
Your sandwich press features a height-
adjustable control located on right-side arm
which allows the top plate to sit one of the
4 (LSG525) or 7 (LSG545) different height
positions above the bottom plate. This allows
your sandwich press to be used to toast a variety
of bread sizes and thicknesses, and also works
for open sandwich melts (see Fig 1).
TOASTED SANDWICH
1. Move the locking clip from the LOCK to
OPEN position, but leave the lid closed.
2. Insert the power plug into a 230V or 240V
power outlet and then turn the power ON.
The orange 'POWER' light will illuminate.
3. Allow the sandwich press to pre-heat with
the top cooking plate in the closed position
until the green 'READY' light illuminates.
4. Whilst the sandwich press is pre-heating
prepare the sandwich. When the sandwich
press has pre-heated, the 'READY' light
will illuminate. Open the top plate and
place using the handle the sandwich onto
the bottom cooking plate. Always place
sandwiches towards the rear of the bottom
cooking plate.
5. Adjust the height-adjustable control to the
setting of choice for the sandwich being
toasted. Close the top cooking plate using
the handle. Do not press down. The top
cooking plate has a floating hinge that
is designed to evenly press down on the
sandwich (see Fig 2).
Fig 1
6. Toasting should take approximately
3-5minutes. Exact toasting time will be a
matter of personal taste. It will also depend
on the type of bread and filling used.
7. When the sandwich is cooked, use the
handle to raise the top cooking plate.
Remove the sandwich with the help of a
plastic, silicone or wooden spatula. Never
use metal tongs or a knife as these can
cause damage to the non-stick coating.
8. When finished using, turn the sandwich
press off at the power outlet and allow
to cool before cleaning. See cleaning
instructions found in this book.
Fig 2
7

Advertisement

loading