Functions - Breville Toast & Melt BSG540 Instruction Book

Functions

BEFORE FIRST USE
Remove any promotional materials and
packaging materials before use. Check that the
cooking plates are clean and free of dust.
If necessary, wipe over with a damp cloth.
When using the sandwich press for the
first time you may notice a fine smoke haze.
This is caused by the heating of some of the
components. There is no need for concern.
TOASTED SANDWICH
1. Insert the power plug into a 230V or 240V
power outlet and then turn the power ON.
The red 'POWER' light will illuminate.
2. Allow the sandwich press to pre-heat with
the top cooking plate in the closed position
until the green 'READY' light illuminates.
3. During this time, prepare the sandwich.
When the sandwich press has pre-heated,
place the sandwich onto the bottom
cooking plate. Always place sandwiches
towards the rear of the bottom
cooking plate.
4. Close the top cooking plate. The top
cooking plate has a floating hinge that
is designed to evenly press down on the
sandwich (see Fig 1).
5. Toasting should take approximately
5–8 minutes. Exact toasting time will be a
matter of taste. It will also depend on the
type of bread and type of filling used.
6. When the sandwich is cooked, use the
handle to open the sandwich press and raise
the top cooking plate. Remove sandwich
with the help of a plastic or wooden spatula.
Never use metal tongs or a knife as these
can cause damage to the non-stick coating.
NOTE
• Always allow the sandwich press to pre-heat
until the green 'READY' light illuminates.
• The safety locking storage clip should not be
used to clamp down the top cooking plate
when the sandwiches are in the sandwich
press. The weight of the top cooking plate
will gradually press down the sandwich
during the cooking process.
• When using the sandwich press for the
first time you may notice a fine smoke haze.
This is caused by the heating of some of the
components. There is no need for concern.
HOT SURFACE - The temperature of
accessible surfaces may be high when the
appliance is operating and for some time
after use.
Fully unwind the cord from the cord storage
facility before use.
Your sandwich press features an Adjustable
Height Control feature which allows you to fix
the top plate to a range of positions above the
bottom plate. This allows your sandwich press
to be used as an open toaster ideal for toasting
open sandwich melts. It can also be used for
toasting sandwiches where you don't need to
apply the weight of the top plate.
Fig. 1
CAUTION
7