Connecting Using A Cable - Samsung Flip WM55B User Manual

Connecting using a cable

" Connecting parts may differ depending on the model.
1
Connect the product to the PC using an HDMI, DP, and USB-C cable.
" HDCP contents will not show on the screen if
" When the screen is black, turn off
support HDCP automatically.
" Use a USB-C cable that is 1 m or shorter in length.
" Charging with USB-C cable is only available when the product is on.
HDMI
DP
<WM55B/WM65B>
" You must use a USB-C cable that supports video transmission. Use a cable that
supports DP ALT Mode (Video transmission).
" Charing is also supported up to 15 W (5 V/max 3 A). Charging with USB-C cable is only
available when the product is on.
PIP Capture is set to On.
PIP Capture because some graphic cards can
<WM75B/WM85B>
" You must use a USB-C cable that supports video transmission and charging function.
Use a cable that supports DP ALT Mode (Video transmission) and Power Delivery
(65 W or higher).
" Charging with USB-C cable is only available when the product is on.
2
Select → IMPORT → PC → HDMI
3
To control the PC from the product screen, connect the supplied USB cable to the
TOUCH port on the product.
" If used in a multi-screen setup, make sure you have configured FLIP as the main
display.
" This step does not apply if you are using a USB-C cable.
" If you use Mac OS, you must install the UPDD driver to control your PC. You can
download the UPDD driver from
resources/product-support.
If you are using MAC with macOS 11 (Big Sur) and over, go to System Preference, click
Security & Privacy, then select App Store and identified developers under the header
Allow apps downloaded from.
TOUCH
/ DisplayPort / USB-C on the screen.
https://displaysolutions.samsung.com/support/
36