Samsung Flip WM55B User Manual page 55

2nd 3rd
Advanced Settings Print Server
Network Drive
Description
Set up the Print Server to use the printing function.
" For more information, refer to "Printing".
• Connect to Server
- Auto: View and select one from a list of server IP addresses of the PCs where Flip Printing Software is installed,
available on the network.
- Manual: Enter the Server IP address and
• Server IP: Enter the Server IP address of the PC where Flip Printing Software is installed.
• Server Port: Enter the Server Port
Add or edit network drive accounts. If you cannot connect to the network drive, update SAMBA of PC to the latest version.
• Add Account: Add new network drive accounts. Only Samba can be added to the network drive.
" SAMBA 2.0 or later is supported. If you cannot connect to the network drive, update SAMBA to the latest version.
" To register a network drive account, you must enter the Address, Username, and Password.
- Address: //computer IP address/shared folder name
" When entering an address, be sure to use / instead of ₩ and \.
For example, if you share a folder named "sharedfolder" on a PC with IP address of 12.34.56.789, enter
"//12.34.56.789/sharedfolder" as the address.
- Username: A Windows account with permissions to the shared folder
" When entering a domain, be sure to use ₩ or \.
For example, DomainName₩WindowsAccount
- Password: The password you set for your Windows account
• Edit Account: Edit network drive accounts.
Server Port number of the PC where Flip Printing Software is installed.
number of the PC where Flip Printing Software is installed.
55