Samsung Flip WM55B User Manual page 24

1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support tab, click the Details button. The Network connection values are
displayed.
How to set up manually
1
Set Network Type to Wireless from the
2
The product searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, select a network.
" If the desired wireless router does not appear, select
" If the router cannot be found after retrying, select
4
If you selected a password-protected network, enter the password, and tap Go.
" You may skip this step if you selected an open network.
5
The network connection screen appears, and the verification process starts.
6
Select Cancel while network connections are being attempted. This will stop the
connection.
7
Select IP Settings on network connection screen. The
8
Select the field at the top and then set
" Changing IP setting to Enter manually
manually.
9
Enter the IP Address, Subnet mask, Gateway, and
10
When done, select OK at the bottom of the page. The network test screen appears, and
the verification process starts.
11
When the connection has been verified, the
screen.
12
Tap OK to complete the setting.
Open Network Settings page.
Refresh to search again.
Add Network.
IP Settings screen appears.
IP setting to Enter manually.
automatically changes DNS setting
DNS Server values manually.
OK button appears on the bottom of the
How to set up using the WPS button
If your router has a WPS button, follow these steps.
1
Set Network Type
2
Select Use WPS.
3
Press the WPS or PBC button on your wireless router within the next two minutes. Your
product automatically acquires all the network setting values it needs and connects to
your network.
4
The network connection screen appears, and network setup is done.
to Enter
to Wireless from the Open Network Settings page.
24