Printing; Installing Flip Printing Software; Setting Up The Printer - Samsung Flip WM55B User Manual

Printing

To print, you must set up the Print Server
To set up the Print Server, the product and the printer you want and your PC must be
connected to the same network.
Flip Printing Software must be also installed on the PC connected.
" For information about how to connect to a network, see
" You can set up the Print Server at
Print Server.
" You can set Clock Set at Menu →
" The Flip Printing Software is available on the website
- http://displaysolutions.samsung.com
- http://www.samsung.com
" Devices that transfer files, such as virtual printers (PDF, XPS, One note, etc.) or fax
machines, are not supported, but only printers that can print actual paper are supported.
" For print paper size, only A4 is supported.
and the Clock Set.
"Connecting to a
Menu → SETTINGS → Connect → Advanced Settings
SETTINGS → System → Time → Clock Set.

Installing Flip Printing Software

Follow the onscreen instructions to install Flip Printing Software.
" The installation takes about 10 minutes, and the time taken may vary depending on your
PC environment.
PC installation requirements
network".
• Supported operating systems:
Windows 7(32/64 bit), Windows 10(32/64 bit), MAC
→
" When installing the software, make sure that critical Windows updates are already
installed. Update Windows to the latest version before beginning the setup.
" For Windows 7, make sure that Service Pack 1 is already installed.

Setting up the printer

After the Flip Printing Software is installed, make the following settings on the product
onscreen menu.
Setting up automatically
1
Select Menu
2
Select Print Server
Setting up manually
1
Select Menu
2
Select Print Server
and the Server Port
→ SETTINGS → Connect → Advanced Settings
→ Connect to Server → Auto.
→ SETTINGS → Connect → Advanced Settings
→ Connect to Server → Manual, and then enter the
number of the PC where Flip Printing Software is installed.
menu.
menu.
Server IP address
47