Protecting Files - JVC GR-D201US Instructions Manual

Protecting Files

The Protect mode helps prevent the accidental
erasure of files.
Power Switch
Lock Button
Fast-Forward Button (FF (5))
Rewind Button
(REW (3))
VIDEO/MEMORY
Switch
SELECT/SET Button
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to "MEMORY".
3
Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
The type of file (IMAGE or E-MAIL CLIP) which
has been played back at the last time is
displayed.
If you want to select another type of file, go to
step 5.
If not, go to step 7.
5
Press SELECT/SET. The MEMORY SELECT screen
appears.
6
Press + or – to select the desired type of file, and
press SELECT/SET.
7
Press MENU. The Menu Screen appears.
8
Press + or – to select
"PROTECT", and press
SELECT/SET. The Sub
Menu appears.
+/- Button
MENU Button
pg. 16)
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
END
To protect the currently displayed file
9
Press + or – to select
"CURRENT", and press
SELECT/SET. The
PROTECT screen appears.
10
Press REW (3) or FF
(5) to select the desired
file.
11
Press + or – to select
"EXECUTE", and press
SELECT/SET.
To cancel protection,
select "RETURN".
Repeat steps 10 and 11
for all files you want to
protect.
To protect all files stored in the memory
card
9
Press + or – to select "PROT.ALL", and press
SELECT/SET. The PROTECT screen appears.
10
Press + or – to select "EXECUTE", and press
SELECT/SET.
To cancel protection, select "RETURN".
NOTES:
If the " " mark appears, the currently displayed
file is protected.
When the memory card is initialized or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
To Remove Protection
Before doing the following, perform steps 1 – 8 in
"Protecting Files" in the left column.
To remove protection from the currently
displayed file
9
Press + or – to select "CURRENT", and press
SELECT/SET. The PROTECT screen appears.
10
Press REW (3) or FF (5) to select the
desired file.
11
Press + or – to select "EXECUTE", and press
SELECT/SET.
To cancel selection, select "RETURN".
Repeat steps 10 and 11 for all files you want to
remove protection.
CONTINUED ON NEXT PAGE
% % % %
   
EN EN
EN EN
M E NU
PROTECT CUR RENT
PROT . AL L
CANC . AL L
RETURN
P ROTECT
PROTECTED
RETURN