Mounting The Attachment - Stihl KA 85 R Instruction Manual

6 Mounting the Attachment

WARNING
Other combinations with basic power tools not
listed here are not permitted since they may
result in accidents or serious personal injury.
5.2 Models with bike handle
The HL-0° attachment is not approved for use on
bike-handled machines.
HL‑145° 500 mm, 600 mm
– STIHL FS 91, FS 111, FS 131
5.3 Models with loop handle
HL‑0° 500 mm
– STIHL KA 85 R
– STIHL FS 91 R, FS 111 R, FS 131 R
– STIHL HL 92, HL 94
HL‑145° 500 mm, 600 mm
– STIHL KA 85 R
– STIHL FS 91 R, FS 111 R, FS 131 R
– STIHL HL 92, HL 94
5.4 Machines with handle hose,
without bike handle or loop
handle
HL‑0° 500 mm
– STIHL HL 92 K
– STIHL HT 102, HT 132
0458-401-0121-E
HL‑145° 500 mm, 600 mm
– STIHL HT 102, HT 132
– STIHL HL 92 K. The HL‑145° version in com‐
bination with basic power tools with a handle
hose is not approved for ground-level cutting.
6 Mounting the Attachment
6.1 Preparations for Mounting the
Attachment
WARNING
To reduce the risk of injury, always shut off the
engine before converting the basic power tool.
NOTICE
Make sure the work area is clean before mount‐
ing or removing the attachment.
► Rest the power tool on the machine support.
6.1.1 Removing the Protective Cap
If a cap is fitted on the end of the power tool's
drive tube:
► Pull the protective cap off the end of the drive
tube and keep it in a safe place.
If the plug comes out of the drive tube when you
pull off the cap:
► Push the plug into the drive tube as far as
stop.
English
9