Provisioning Tasks; Setting Date And Time - ADC HiGain H2TU-C-202 User Manual

LTPH-UM-1208-01
P T
ROVISIONING
After the H2TU-C is successfully installed, perform these basic provisioning tasks:
•
Set date and time (see
•
Set circuit ID numbers (see
•
Make any configuration changes (see
•
Clear history, alarm, and event log screens to remove miscellaneous data acquired during startup (see
"Clearing the History, Alarm, and Event Log Screens" on page

Setting Date and Time

To set the date and time:
C
1 Press to select the Config menu.
2 Use the ↑ and ↓
3 Type the date in the format indicated (see
4 Type the time in the format indicated (entering seconds is optional), then press
H2TU-C-202 List 7G
ASKS
"Setting Date and Time"
"Setting Circuit ID Numbers" on page
"Configuring the System" on page
arrow keys to select Date and Time, then press
Figure
Figure 5. Config Menu - Date and Time
on this page).
12).
25).
ENTER
ENTER
4), then press
June 6, 2003
13).
.
.
ENTER
.
Provisioning
11