Provisioning Tasks; Setting Date And Time; Configuration Menu - Date And Time - ADC HiGain H2TU-C-388 List 1E User Manual

152-388-115-03, Issue 03
P T
ROVISIONING
After the H2TU-C-388 is successfully installed, perform these basic provisioning tasks:
• Set date and time
• Set circuit ID numbers
• Make any configuration changes
• Clear history, alarm, and event log screens to remove miscellaneous data during startup

Setting Date and Time

Monitor Performance
ID: xxxx--xxxx--xxxx--xxxx
1 Press C to select the Config menu.
2 Select Date and Time, then press
3 Type the date in the format indicated, then press
4 Type the time in the format indicated, then press
H2TU-C-388 List 1E
ASKS
Event Log Config
+----------------------+
| Standard Options ->
| PairGain Options ->
| Date and Time
+-------------------------------+
| Date (mm/dd/yyyy):
| Time (hh:mm[:ss]): 12:30:01
+-------------------------------+
04/21/00 12:30:01
Figure 5. Configuration Menu - Date and Time
ENTER .
April 21, 2000
Inventory Rlogon Help
|
|
-> |
04/21/2000
H2TU-C
ENTER
.
ENTER
. Typing seconds is optional.
Provisioning
|
|
System: OK
15