Recording/Playback; Recording Files; Video Recording - JVC Everio GZ-MS100 Manual Book

RECORDING/PLAYBACK

Recording Files

Video Recording

•
Preparation:
Insert an SD card.
•
Open lens cover.
•
Open the LCD monitor to turn on the camcorder.
Slide the mode switch to select
!
(video) mode.
L
To stop recording
Press the START/STOP button again.
L
To view the video you just recorded
A
Select during pause.
During the preview, you can delete the
video by selecting
L
To change the picture quality
Change the settings in [VIDEO QUALITY].
(Z pg. 61)
L
To register a file to an event
See page 23.
NOTES
•
The video recording mode is automatically selected when you turn the camcorder's power off and
then on again.
•
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to
conserve power. To turn the camcorder on again when using the battery pack, close the LCD monitor
and open it again. When using the AC adapter, perform any operation such as zooming.
•
Video files are given the names MOV001.MOD to MOV009.MOD, MOV00A.MOD to MOV00F.MOD,
and MOV010.MOD in order of recording.
•
After recording video for 12 consecutive hours, recording stops automatically.
•
A new file will be created for every 4 GB of continuous shooting.
•
This camcorder records video in MPEG2 format compliant with SD-VIDEO format. This camcorder is
not compatible with other digital video formats.
*
.
Press the SELECT PLAY/REC
button to select recording mode.
SELECT
PLAY/REC
Press the START/STOP button to
start recording.
Approximate remaining time for
recording appears.
L
To change the aspect ratio of the image
(16:9/4:3)
Change the settings in [SELECT ASPECT
RATIO]. (Z pg. 62)
L
To record a video clip (approx. 10
minutes)
Before you start recording, press UPLOAD
button twice to "UPLOAD REC ON"
(Z pg. 24).
1