JVC Everio GZ-MS100 Manual Book page 42

Print Setting
To Print Using the DPOF Settings
If the printer is compatible with DPOF, you
can use the DPOF settings. (Z pg. 40)
After performing steps 1-2 (Z pg. 41)
3
Select [DPOF PRINT].
4
Select [PRINT].
L
To stop printing after printing has
already started
1) Select [STOP].
2) When [QUIT PRINTING?] appears,
select [YES].
L
To confirm the DPOF setting
In step 4, select [CHECK SETTINGS]. To
return to the previous screen, select
NOTES
•
If the printer is not recognized, disconnect
the USB cable, then reconnect it.
•
You cannot return to the previous screen
while operating Direct print. If you want
to redo the operation, remove the USB
cable, turn the camcorder off, and start the
operation again from the beginning.

(Continued)
@
.
#