JVC Everio GZ-MS100 Manual Book page 67

Trouble
White balance setting
cannot be activated.
The continuous
shooting speed is slow.
Playback cannot be
performed.
The same image is
displayed for a long
time during video
playback, or motion is
choppy.
Files cannot be deleted.
The data process is too
slow after the power
is switched on or the
mode is changed.
The SD card cannot
be removed from the
camcorder.
The [CREATE DVD]
screen is displayed in
the LCD monitor, and
no other operations
can be performed.
The touch sensor or
sensor button does not
function.
•
Do not select the sepia (SEPIA) or monotone
(MONOTONE) mode before setting white balance.
•
The continuous shooting speed will drop after repeated
continuous shots, depending on the SD card or under
certain recording conditions.
•
To watch images on a TV, set the TV's input mode or
channel that is appropriate for video playback.
•
Replace the SD card. (When the surface of the card is
damaged, difficulty in reading the data occurs.)
•
Format the SD card.
•
Remove protection from the files and delete them.
•
There is a large number of still images (approx. 1,000
or more) stored in the SD card. Copy the stored files to
other devices, and delete them from the SD card.
•
Push the SD card in a few more times.
•
Another operation is being attempted while a DVD burner
that is turned on is connected. Turn off the camcorder
connected to the DVD burner, or disconnect the USB
cable.
•
Touch the sensors with your finger. The sensors do not
function if you touch them with your fingernail or with
gloves on.
Action
Z
27
–
32
–
64
34
33
20
–
8