Table 22. Isdn Options - ADC PG-Flex FLL-812 Manual

SCP-FLL812-011-01H
System Options
Sealing Current
EOC Mode
SES Count
PM Mode
B Channel Swap
Zero Byte Substitution
PM Clock Mode
PM Clock Source
(Manual Mode)
96

Table 22. ISDN Options

Value
OFF No sealing current is applied to the ISDN
subscriber loop
ON A constant current of approximately 5 MA
flows in the ISDN subscriber loop at all
times
MP-EOC-SLAVE EOC messages are decoded and re-
transmitted within the PG-Flex system
TRANSPARENT EOC messages are not decoded and are
passed through the PG-Flex system
transparently
1 to 15 The number of ISDN BE allowed before
SES count is incremented
INTERIM PATH Considers the channel as one path and
collects the end-to-end error rate for the
entire transport path
SEGMENTED PATH Considers the channel as separate
sections and individually collects error
rates for each DSL loop
NORMAL Channels "B1" and "B2" at the CO ISDN
"U" interface are routed to channels "B1"
and "B2" at the RT ISDN "U" interface
SWAP Channels "B1" and "B2" at the CO ISDN
"U" interface are routed to channels "B2"
and "B1" at the RT ISDN "U" interface
DISABLE PG-Flex system passes all data through
without any special encoding
ENABLE PG-Flex system will use a ZBS code to
prevent long strings of zeros in the data
AUTO
PM Clock Source field
MANUAL Clock source is determined by PM Clock
Source field
PG-FLEX Clock source is determined by PG-Flex
system clock
ISDN SWITCH Clock source is determined by ISDN clock
Description
"0" byte of the channel unit determines the
March 13, 2003
Default
ON
MP-EOC-SLAVE
3
INTERIM PATH
NORMAL
DISABLE
AUTO
PG-FLEX
ADC Telecommunications, Inc.