ADC PG-FlexPlus AMU-912 Manual page 112

SCP-AMU912-010-06H
CONFIG — Set Factory Defaults (Continued)
Step
3 The following actions can be taken:
a. To reset the system options back to the original factor default settings, press
CONFIGURATION DATA WILL BE SET TO FACTORY DEFAULTS (THIS MAY BE SERVICE
AFFECTING!) CONTINUE (Y/N)? prompt, the following actions can be taken:
• To save the Factory Default changes, press
– all current values are reset to the factory default values
• To retain the existing configuration data, press
4
Press . The Main Menu screen reappears.
ESC
100
Action
. The following events occur:
Y
.
N
July 19, 2004
. From the
ENTER
ADC Telecommunications, Inc.