Tides; Viewing The Tide Data; Anchor; Marking Your Anchor Location - Garmin QUATIX 6 Owner's Manual

Table of Contents

Tides

When you pair your device with a smartphone, you can download up to seven days of tide data for your current

location. You can update your location and download new tide data by selecting MOB from the tide screen.

1 From the watch face, select MOB > Tides.

A 24-hour tide chart appears, showing the high tides

and low tides

for the current date.

2 Select UP or DOWN to view the tide data from other days.

1 From the watch face, select MOB > Anchor.

2 Select MOB > Drop Anchor.

Select MOB > Anchor > MOB.

Drift Radius: Sets the allowable drift distance while anchored.

Update Interval: Sets the time interval for updating anchor data.

From the anchor assist screen, select MOB.

Scope: Sets the first number in the anchor scope ratio. The ratio is the length of anchor rode in use to the

vertical distance from the bow of the boat to the bottom of the water.

Depth: Sets the depth of the water.

Bow Offset: Sets the distance between the bow of your boat and the location of your GPS antenna.

WARNING

You are responsible for the safe and prudent operation of your vessel. The autopilot is a tool that enhances your

capability to operate your boat. It does not relieve you of the responsibility of safely operating your boat. Avoid

navigational hazards and never leave the helm unattended.

Always be prepared to promptly regain manual control of your boat.

Learn to operate the autopilot on calm and hazard-free open water.

Use caution when operating the autopilot near hazards in the water, such as docks, pilings, and other boats.

Marine Activities

Table of Contents