Advertisement
323/324/325
Calibration Manual
Symbol
CAT II
CAT IV
4
Meaning
Hazardous voltage. Risk of
electric shock.
AC (Alternating Current)
AC and DC Current
Double insulated
Application to or removal from
hazardous, live conductors is
permitted.
Conforms to relevant
Australian EMC standards.
This product has been tested
to the requirements of
CAN/CSA-C22.2 No. 61010-1,
second edition, including
Amendment 1, or a later
version of the same standard
incorporating the same level of
testing requirements.
Measurement category II is
applicable to test and
measuring circuits connected
directly to utilization points of
low voltage mains installation.
Measurement Category IV is
applicable to test and
measuring circuits connected
at the source of the building's
low-voltage MAINS
installation.
Table 1. Symbols
Symbol
Risk of Danger. Important information. See
Manual.
DC (Direct Current)
Earth Terminal
Battery
Conforms to European Union directives.
Inspected and licensed by TÜV Product
Services.
Conforms to European Union directives.
Measurement Category III is applicable to
test and measuring circuits connected to the
CAT III
distribution part of the building's low-voltage
MAINS installation.
This product complies with the WEEE
Directive (2002/96/EC) marking
requirements. The affixed label indicates
that you must not discard this
electrical/electronic product in domestic
household waste. Product Category: With
reference to the equipment types in the
WEEE Directive Annex I, this product is
classed as category 9 "Monitoring and
Control Instrumentation" product. Do not
dispose of this product as unsorted
municipal waste. Go to Fluke's website for
recycling information.
This product complies with the
Regulation for the Administration of the
Recovery and Disposal of Waste
Electrical and Electronic Products
(China).
Meaning
Note
Advertisement
