Temperature, Volts, Ohms, Frequency, and Capacitance
To do the temperature, volts, ohms, and capacitance performance tests:
1. Connect the Calibrator NORMAL output and ground to the Product. See Figure 4 for
the connections.
2. Apply the values shown in Table 4.
If the Product shows indications outside of the limits shown in Table 4, calibration
adjustment is necessary. See "Calibration Adjustment".
325
TRUE RMS CLAMP METER
CAT
600 V
CAT
300 V
Figure 4. Temperature, Volts, Ohms, Frequency, and Capacitance Performance Test Connections
Clamp Meter
Performance Tests
5522A
/ +
0
•
hfk07.eps
11