Top Brace; Removal - Agilent Technologies PSA Series Service Manual

Assembly Replacement Procedures

Top Brace

Top Brace

Removal

1. If you haven't already done so, remove the instrument outer case.
2. Using the T-10 driver, remove the top screws (3) (one screw is under
3. The top brace can now be removed from the deck.
Figure 11-4 Top Brace
312
Refer to the "Instrument Outer Case"
the security label) and the side screws (2) attaching the top brace
(1) to the deck. Refer to
removal procedure.
Figure 11-4.
Chapter 11