Table of Contents
Advertisement
DESCALING
If the water hardness in your area is high or
moderate, we recommend that you use a water
descaling product for washing machines.
Regularly examine the drum to prevent limescale
and rust particles.
To remove rust particles use only special products
for washing machines. Do this separately from the
laundry wash.
Always obey the instructions that you
find on the packaging of the product.
MAINTENANCE WASH
With the low temperature programmes it is possible
that some detergent stays in the drum. Perform a
maintenance wash regularly. To do this:
•
Remove all laundry from the drum.
•
Select the cotton programme with the highest
temperature with a small quantity of detergent.
CLEANING THE DETERGENT DISPENSER
CLEANING THE INLET HOSE AND THE VALVE FILTER
1
1
2
3
18
1.
3.
2
LID SEAL
Regularly examine the seal and remove all objects
from the inner part. Clean it when needed, using
ammonia cream cleanser agent without scratching
the seal surface.
Always obey the instructions that you
find on the packaging of the product.
CLEANING THE DRUM
Regularly examine the drum to prevent rust
particles. For a complete cleaning:
- Clean the drum with special products for stainless
steel. Add a small quantity detergent into empty
drum, in order to rinse out any left residues.
- Run a short cotton programme at high
temperature.
Always obey the instructions that you
find on the packaging of the product.
3
2.
4
O
O
90
90
Advertisement
Table of Contents
