Sony HDC-900 Maintenance Manual page 93

Adjustment Procedures
1. Adjust the white balance.
WHITE button/MSU-700A → ON (lit)
2. If the shading is monitored, proceed as follows
MSU menu operation:
. MAINTENANCE button → ON (lit)
. Touch panel operation
[Adjusting] → [White|Shading] → [R]
. Adjustment Items: H Saw, H Para, V Saw, V Para
(H SAW)
(V SAW)
3. Adjust for G-ch in the same manner.
4. Adjust for B-ch in the same manner.
5. Adjust the white balance.
WHITE button/MSU-700A → ON (lit)
Lens File Store
MSU menu operation:
. FILE button → ON (lit)
. Touch panel operation
[Lens|File] → [Lens|Store] → [Store]
HDC-900/950 MM
(H PARA)
(V PARA)
6-6. Video System Level Adjustment (When using MSU)
Adjustment for Lens Extender/Shrinker
When using the lens extender or lens shrinker, perform the
following adjustments after the completion of lens file
store.
Using the lens extender
6. Set the setup menu as follows.
MENU: OPERATION
PAGE: LENS FILE
ITEM: FILE
(Select the file in accordance with the lens attached. If
there is no appropriate file, select NO OFFSET, then
change the name of lens with MSU.)
7. Lens extender (x2) → ON
8. Perform procedures 2 to 5, then perform the lens file
store again.
9. Lens extender (x2) → OFF
Using the lens shrinker
10. Set the setup menu as follows.
MENU: OPERATION
PAGE: LENS FILE
ITEM: FILE
(Select the file in accordance with the lens attached. If
there is no appropriate file, select NO OFFSET, then
change the name of lens with MSU.)
11. Lens shrinker (x0.8) → ON
12. Perform procedures 2 to 5, then perform the lens file
store again.
13. Lens shrinker (x0.8) → OFF
6-21 (E)