Sony HDC-900 Maintenance Manual page 84

6-5. Video System Level Adjustment (When using the Setup Menu)
. Call the file in accordance with the lens attached.
Menu setting:
MENU: FILE
PAGE: LENS FILE
ITEM: FILE No.
n
If no corresponding file exists, select the file number
whose FILE NAME is displayed as NO OFFSET, and
change the lens name.
Menu setting:
MENU: FILE
PAGE: LENS FILE
ITEM: FILE NAME
Adjustment Procedures
1. Adjust the white balance.
AUTO W/B BAL switch (front panel) → WHT
2. Select the R signal output on the waveform monitor.
If the white shading is monitored, make the waveform
flat referring to the following tables.
Output signal H SAW
of waveform MENU: MAINTENANCE MENU: MAINTENANCE
monitor PAGE:
WHITE SHADING
R R ITEM: H SAW (R)
G G ITEM: H SAW (G)
B B ITEM: H SAW (B)
MONITOR OUT
connector
Output signal V SAW
of waveform MENU: MAINTENANCE MENU: MAINTENANCE
monitor PAGE:
WHITE SHADING
R R ITEM: V SAW (R)
G G ITEM: V SAW (G)
B B ITEM: V SAW (B)
MONITOR OUT
connector
6-12 (E)
3. Perform the adjustments for G-ch and B-ch with the
4. Adjust the white balance.
Lens File Store
Menu setting:
MENU:
PAGE:
ITEM:
Specify the file number to be saved, and execute FILE
STORE.
H PARA
PAGE:
WHITE SHADING
ITEM: H PARA (R)
ITEM: H PARA (G)
ITEM: H PARA (B)
V PARA
PAGE:
WHITE SHADING
ITEM: V PARA (R)
ITEM: V PARA (G)
ITEM: V PARA (B)
same procedures as for R-ch.
AUTO W/B BAL switch (front panel) → WHT
FILE
LENS FILE
STORE FILE
HDC-900/950 MM