Sony HDC-900 Maintenance Manual page 36

2-6. Replacing the Boards
3. Open the memory stick cap, and remove the two
screws.
4. Remove the CN-2073 board.
n
The memory stick ejector will disconnect at the same time.
Be careful not to lose it.
P2.6 x 5
Memory stick cap
5. Install the new CN-2073 board in the reverse order of
steps 1 to 4.
6. After installing, make sure that the memory stick has
been inserted in smooth free from getting any troubles.
2-14 (E)
CN-204 board
Memory stick ejector
HDC-900/950 MM