Kohler K-8297KR-HC-0 Homeowner's Manual page 16

C3 toilet seat with bidet functionality
Hide thumbs Also See for K-8297KR-HC-0:
Table of Contents

Advertisement

TROUBLESHOOTING (cont.)
Cleansing Functions
Symptoms
6 . No water flow.
7. The water pressure A. The screen is clogged.
is low.
8. Water stops
flowing from the
spray wand before
finish cleansing.
9. Dripping water from A. Product internal high water A. Normal phenomenon.
side wand hole.
1 0.Dripping water
from wand when sit
on.
Slow Close Cover
Symptoms
11 . The speed of the
seat and cover closure temperature.
varies in summer and
winter.
Seat Sensor
Symptoms
12. Clean function
operate when press
the CLEAN button
while seat is not
occupied.
13. Even sit on,
CLEAN function does
not work.
1500352-KRS-A
Probable Causes
A. The water supply stop is
closed.
B. The seat sensor is not
detecting the user.
B. Insufficient water supply
pressure.
A. Spray function auto stop
after 5min continuous spray.
B. The seat sensor is not
detecting the user.
pressure protection.
A. Auto discharge internal
residual water within wand
when nobody use for a long
time.
Probable
A. Due to changes in room
Probable
A. The seat sensor is covered
by an object or the seat is wet. object from the seat sensor
A. The seat sensor might not
be able to detect you
depending on the way you're
sitting.
16
Recommended Action
A. Open the water supply stop
B. Refer to activating the seat
information in "FUNCTION
TEST" section.
A. Refer to "CLEAN THE
SCREEN" section.
B. Raise water pressure to
product required water
Ipressure range.
A. When necessary, press
CLEAN button again.
B. Refer to activating the
seat information in
"FUNCTION TEST" section
A. Normal phenomenon.
Recommended Action
A. Normal phenomenon.
Recommended Action
A. Remove any water or
area.
A. Change the way you sit.
Kohler Co.

Advertisement

Table of Contents
loading

Table of Contents