Overview Of The Modules - Siemens LOGO! 24RC Manual

LOGO! Program Modules

6.1 Overview of the Modules

Yellow program module
You can read and write programs with this module.
Red program module
You can only write programs with this module. Once a pro-
gram has been stored, it cannot be looked at, copied or
changed (i.e. your data is protected).
Programs saved like this can only be run if the module re-
mains inserted in LOGO! while the system is in operation.
Warning
!
138
Make sure that you don't save your program on
a module with program protection if you intend to
edit it further.
You can start up a program on a module with
know-how protection but not read it for the pur-
pose of editing.
LOGO! Manual
A5E00067781 01