The 4 Golden Rules For Working With Logo - Siemens LOGO! 24RC Manual

Programming LOGO!
3.4 The 4 Golden Rules for Working with
LOGO!
Rule 1
3-finger grip
Enter the circuit in programming mode. Switch to pro-
gramming mode by pressing the 3 keys ,
the same time.
Change the values of times and parameters in parame-
terization mode. Switch to parameterization mode by
pressing the 2 keys ESC and OK at the same time.
Rule 2
Outputs and inputs
Always enter a circuit from output to input.
You can connect an output to several inputs, but not
several outputs to one input.
You can't connect an output to a preceding input within
a program path. Insert markers or outputs in such cases
(recursions).
36
and OK at
LOGO! Manual
A5E00067781 01