Changing A Parameter - Siemens LOGO! 24RC Manual

Parameterizing LOGO!
B01:T
T = 12:00m
T
No Param
Press ESC
3. Select the desired parameter:
or
LOGO! displays a parameter in a separate window.
4. To change a parameter, select it and press OK.

5.1.3 Changing a Parameter

To change a parameter, you first have to select it (see "Se-
lecting a parameter).
You change the value of the parameter in the same way as
you entered it in programming mode:
1. Move the cursor to the point at which you want to make
the change:
or
2. Change the value:
or
3. Accept the value:
OK
B01:T
T = 01:00m
T
To change value:
132
= 00:00m
a
= 00:00m
a
or
Parameter
Value set for the parameter
Current time in LOGO!
No parameter can be changed:
ESC returns you to the parameterization menu
To move: or
Finished: OK
key
key
LOGO! Manual
A5E00067781 01