Introduction; System Specifications; Pat1M / Pat1.5M Tools - Panduit PAT1M Operation Manual

INTRODUCTION

The PAT1M/PAT1.5M Fully Automatic Cable Tie Installation System was designed by Panduit Corporation to install
PANDUIT continuously molded cable ties for high volume wire harnessing applications.
NOTE: In the interest of higher quality and value, PANDUIT products are continually being
improved and updated. Consequently, pictures may vary from the enclosed product.

SYSTEM SPECIFICATIONS

The Panduit Corporation PAT1M/PAT1.5M Cable Tie Installation System consists of four compatible units: the
PAT1M or PAT1.5M Installation Tool, the PDM Dispenser, the PHM Feeder Hose, and PANDUIT P
Order the following reels of continuously molded cable ties (5000 cable ties per reel) for your specific installation tool:
PLT1M-XMR cable ties for the PAT1M Tool, and PLT1.5M-XMR cable ties for the PAT1.5M Tool.
NOTE: Any substitution may cause serious damage to the system and/or injury to the operator.

PAT1M / PAT1.5M TOOLS

The PAT1M and PAT1.5M Cable Tie Installation Tools are electrically powered and controlled by the PDM
Dispenser. Designed for easy operation: hand held, lightweight, and right or left hand use. The tool jaws are
normally open for easy positioning around wire harnesses and the jaws are closed by pulling up on the trigger before
application of the cable tie. After the cable tie has been applied, the jaws are re-opened upon release of the trigger
for positioning of the tool at the next cable tie location.
Tool Type
PAT1M
PAT1.5M
PAT1M/PAT1.5M: PA22222A01_03
Downloaded from Elcodis.com electronic components distributor
PAT1M / PAT1.5M OPERATION MANUAL
P -T Cable Ties
AN Y
3/32" (2,4 mm) wide x
PLT1M-XMR
3/32" (2,4 mm) wide x
PLT1.5M-XMR
Cable Tie Size Max. Bundle Dia.
4.1" (104 mm) long
5.5" (140 mm) long
LENGTH:
WIDTH:
HEIGHT:
WEIGHT:
HANDLE SIZE:
JAW WIDTH:
TRIGGER FORCE:
TRIGGER STROKE:
Page: 1 of 36
-T
AN Y
Reel Quantity
0.82" (21 mm) 5000 Cable Ties
1.31" (33 mm) 5000 Cable Ties
10.12" (257 mm)
1.89" (48 mm)
4.09" (104 mm)
1.75 lbs. (0,79 kg)
1.34" (34 mm) thick x
1.99" (50,5 mm) wide
0.247" (6,3 mm) thick
0.9 lbs. (0,41 kg)
0.37" (9,4 mm)
Dec., 2007
Cable Ties.