HP Spectre x360 Maintenance And Service Manual page 59

a. On the top-left side of the display panel, use a suction cup tool to separate the panel slightly from
the rear cover. Only separate the panel enough to gain access to the panel tape.
b. Use tweezers to grasp the end of the retention tape (1) that is installed under the panel.
c. While turning the tweezers (2), wrap the tape around the tweezers as you continue to pull the tape
(3) out from behind the display panel.
d. Rotate the hinges all the way up (1).
e. Remove the rubber piece from each hinge cover (2).
f. Pull the cables free from both hinges covers (3).
g. Separate the panel from the rear cover (4).
Display assembly 53