Installing The Cutter - Intermec EasyCoder PD4 Installation Instructions Manual

Chapter 1 — Installation

Installing the Cutter

1 Unpack your EasyCoder PD4 cutter kit and check to see that all parts are
included. If not, contact your sales representative.
Cutter
mechanism
Cutter cover
2 Make sure the printer is unplugged. Remove the screw
that holds the front cover. Remove the front cover.
2
2 screws
with washers
Cutter tray
Front cover
EasyCoder PD4 Cutter Installation Instructions
2 cable
clips
Screw