Before You Begin; Safety Summary - Intermec EasyCoder PD4 Installation Instructions Manual

Cutter

Hide thumbs Also See for EasyCoder PD4:

Before You Begin

Th is section provides you with safety information, technical support informa-

tion, and sources for additional product information.

Your safety is extremely important. Read and follow all warnings and cautions

in this document before handling and operating Intermec equipment. You can

be seriously injured, and equipment and data can be damaged if you do not

follow the safety warnings and cautions.

Do not repair or adjust alone

Do not repair or adjust energized equipment alone under any circumstances.

Someone capable of providing ﬁ rst aid must always be present for your safety.

First aid

Always obtain ﬁ rst aid or medical attention immediately after an injury. Never

neglect an injury, no matter how slight it seems.

Resuscitation

Begin resuscitation immediately if someone is injured and stops breathing.

Any delay could result in death. To work on or near high voltage, you should

be familiar with approved industrial ﬁ rst aid methods.

Energized equipment

Never work on energized equipment unless authorized by a responsible

authority. Energized electrical equipment is dangerous. Electrical shock from

energized equipment can cause death. If you must perform authorized emer-

gency work on energized equipment, be sure that you comply strictly with

approved safety regulations.

EasyCoder PD4 Cutter Installation Instructions

Table of Contents