Ccd Camera - Clarion pro audio vrx 630 Owners & Installation Manual

CCD Camera

Monitoring the CCD camera
The CCD camera can be connected to this unit.
For the power supply of the camera, mount the
power box sold separately (CCA-188).
Notes:
• This function is not available when the display is
stored.
• Refer to the subsection "Sample System 3" in
"9. SAMPLE SYSTEMS" section.
30
VRX630
Operation of External Visual
Devices (VISUAL Mode)
External visual devices such as DVD and VTR
devices can be connected to the DIN 8-pin ter-
minal, and the image and sound can then be
played using VISUAL mode.
Notes:
• While driving, the image of the VISUAL Mode is
turned OFF and only sound is played.
• Images can only be played when the vehicle is sta-
tionary with the parking brake ON.
1. With the panel open, push VISUAL button )
to switch from radio, TV, CD/MD changer
mode to VISUAL mode.
2. To exit VISUAL Mode and return to the previ-
ous mode, press VISUAL button ) again.
The image format played in VISUAL mode can
be set to NTSC or PAL format. The setting
method is the same as for the TV. Please refer
to the TV explanation.
In VISUAL mode, the picture quality can be
adjusted. The setting method is the same as
for the TV. Please refer to the TV explanation.
Switching to Composite
Screen
The display panel can be switched to a composite
screen to lock the monitor.
1. When the panel is open, press the OPEN/
MONI LOCK button ! to switch to the com-
posite screen.
2. When the panel is open and the composite
screen is shown, press the MONI LOCK but-
ton ! again to return to the previous screen.