Download Print this page

Intermec EasyCoder PF2i Supplementary Manual page 2

Intermec easycoder pf2i: supplementary guide
Hide thumbs Also See for EasyCoder PF2i:

Advertisement

Taux d'Absorption Spécifique (TAS)
Renseignements sur l'exposition aux ondes radio et sur le Taux d'absorption spécifique (TAS) pour les configurations du modèle
PM4i utilisant le lecteur d'étiquettes RFID offert en option
Lors de l'installation et de l'utilisation du lecteur d'étiquettes Intermec RFID, une distance de passage de 20 cm (8 po) doit être maintenue
entre l'antenne RFID et toute partie du corps de l'utilisateur ou des personnes à proximité. Il ne faut pas toucher à l'antenne pendant le
fonctionnement de l'émetteur.
For Users Outside of the United States or Canada
Caution: This marking indicates that the user should read all included documentation before use.
Specific Absorption Rate (SAR)
Radio Wave Exposure and Specific Absorption Rate (SAR) Information for Model PM4i, PF4i, PF2i, PX4i, or PX6i Configurations with
802.11g Radio
When installing and using the Intermec PM4i, PF4i, PF2i, PX4i, or PX6i, a 20-cm (8-inch) passing distance must be maintained from any
body part of the user or nearby persons and the device. Use of any other transmitting devices within 20 cm (8 inches) of this radio could void
the user's authority to operate this equipment.
Specific Absorption Rate (SAR)
Radio Wave Exposure and Specific Absorption Rate (SAR) Information for Model PM4i Configuration Using the Optional RFID Tag
Reader
When installing and using the Intermec RFID tag reader, a 20-cm (8-inch) passing distance must be maintained from any body part of the
user or nearby persons and the RFID antenna. The antenna must not be touched during transmitter operation.
美国和加拿大以外的用户请注意
警告:
该标志表明用户在使用前应阅读所有随附文档。
特定吸收率。(SAR)
有关型号 PM4i、PF4i、PF2i、PX4i 或 PX6i 配置 (采用 802.11g 无线电)的无线电暴露及特定吸收率 (SAR) 信息
安装和使用 Intermec PM4i、PF4i、PF2i、PX4i 或 PX6i 时,读取器与使用者身体任一部位或附近人员以及 RFID 天线之间必须保持 20
厘米 (8 英寸)的空间距离。如果在距离该无线电设备 20 厘米 (8 英寸)的范围内使用任何其他传输设备,则用户将无法操作该设
备。
特定吸收率。(SAR)
有关 PM4i 型号配置 (使用可选 RFID 标签读取器)的无线电暴露及特定吸收率 (SAR) 信息
安装和使用 Intermec RFID 标签读取器时,读取器与使用者身体任一部位或附近人员以及 RFID 天线之间必须保持 20 厘米 (8 英寸)的
空间距离。操作发射器期间,不得触摸天线。
Für Benutzer außerhalb von Kanada oder den Vereinigten Staaten
Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen
lesen soll.

Advertisement

loading

This manual is also suitable for:

Pf4iPm4iPx4iPx6i