Nomenclature; Names Of The Buttons And Their Functions - Clarion DXZ868RMP Owner's Manual

3. NOMENCLATURE

Names of the Buttons and their Functions

IR-Receiver
• Receiver for remote control unit. (Operating
range: 30° in all directions)
[ADJ] button
• Use this button to set or adjust the various
settings in the adjust mode.
[Q] (OPEN/EJECT) button
• Open/closes the control panel.
To eject a disc, open the control panel first, and
then press this button once again.
Photo Sensor
• This sensor detects the brightness inside your
car. When the auto-dimmer function is set to
"AUTO", the brightness of the display is
dimmed according to the brightness detected
by this sensor.
[MODE] button
• Use this button to play in scan, repeat, or
random mode.
• Press and hold this button for 2 seconds or
longer to switch between standard and simple
operation displays.
[ ] (SOUND) button
• Use this button for setting or adjusting various
settings such as ADF.
[TA] button
• Use this button to turn on/off TA (Traffic
Announcement).
[SRC] button
• Switches among sound sources as shown
below.
Radio ➜ (DAB) ➜ CD/MP3 ➜ (CD changer) ➜
(DVD changer) ➜ (TV) ➜ AUX ➜ Radio...
Note:
External equipment not connected with CeNET is
not displayed.
[ROTARY] knob
• Press the knob to turn the power ON.
• Press the knob to turn the power OFF.
• Turn the knob to adjust the volume.
[CD SLOT]
• CD insertion slot.
6
DXZ868RMP
DCP Detaching Slider
• Removes the DCP.
Display
• Displays the various information that indicates
the operating state of this unit such as tuning/
play state and indicators.
• You can operate the display by touching or
touching the surface. (cf. page 9)