Clarion DXZ868RMP Owner's Manual page 40

Common Operations
4. Touch [START].
The confirmation display appears.
5. Touch [OK].
ADJ SETTING
OK
After this operation, the display returns to
the original mode.
Using the security function
(CODEMATIC)
This function prevents persons who do not know
the touch sequence from easily operating this
unit. The Touch Code display appears when
DCP is attached and the power is turned ON
with "CODEMATIC" set to "ON".
If you touch the display in this screen in the
preset order, "SUCCESSFUL" is displayed and
the power is turned OFF.
When the power is next turned ON, the Touch
Code display does not appear, and the main
display in the radio mode or CD mode is
displayed.
• The factory default setting is "OFF".
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch on the left of the display to
select "CODEMATIC".
ADJ SETTING
CODEMAT I C
2 types of items are displayed for
"CODEMATIC", items for which "ON" or
"OFF" is displayed at the right of the screen,
and items for which "INPUT" is displayed at
the right of the screen. Here, select the item
for which "ON" or "OFF" is displayed at the
right of the display.
4. Touch on the right of the display to
select "ON" or "OFF".
5. Touch on the left of the display to
select "CODEMATIC".
ADJ SETTING
CODEMATIC
40
DXZ868RMP
CANCEL
OFF
RTN
INPUT
RTN
Here, select the item for which "INPUT" is
displayed at the right of the display.
6. Touch [INPUT].
The Touch Code display appears.
7. Enter the touch code.
∗ Touch [1] to [4] at the bottom of the display
at random. You can also repeatedly touch
the same number.
CODE MATIC
1 2
When you touch 4 times, and 4 indicators
light, you will hear a long beep, and the
original mode is returned to.
■ To cancel CODEMATIC
If you have forgotten the touch order, either
touch [4], [1], [3] and then [2] in that order, or
press [SCN] on the remote control unit.
Setting the slide direction of
the slide buttons (SLIDE
CONT)
This function allows you to set the direction of
the left and right slide buttons.
• The factory default setting is "UP ➜ +".
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch on the left of the display to
select "SLIDE CONT".
ADJ SETTING
SLIDE CONT
4. Touch on the right of the display to
select "UP ➜ +" or "DOWN ➜ +".
5. Press the [ADJ] button to return to the
original mode.
3 4
UP
RTN