Table of Contents
Advertisement
General
The heater is designed for wall mounting using the wall bracket supplied.
It should only be operated when in the upright position as shown - see Fig. 3
and Fig. 4. All models are splash proof to IP24 standard and may be used in
bathrooms, however not in the immediate vicinity of baths, showers, water
connections, wash basins or swimming pools. Before connecting the heater
check that the supply voltage is the same as that stated on the heater.
Wall Mounting
IMPORTANT – The wall bracket supplied with the appliance
must be used. The heater should be positioned observing the
minimum clearances stated around the heater - see
Fig. 2, Fig. 3 and Fig. 4.
DO NOT locate the heater immediately below a fixed socket
outlet or connection box.
1.
Remove wall mounting plate from the back of the
heater by firstly removing the M4x20 screw with a
Pozi Head No.2 screwdriver see Fig 1.
2.
Fix the wall bracket securely to the wall through the
four screw holes provided referring to dimension A Fig 2.
3.
Present the wall brackets on the heater to the wall
mounting plate and engage lower slots in the wall
brackets to the hooks on the wall mounting plate.
4.
Position the top slots onto the top hooks and slide the
heater downwards until the slots come to a positive stop.
5.
Re-insert the M4x20 screw in the M4 clinch nut on the
wall bracket. This secures the heater to the wall plate.
Dimensions
Model(s)
LST050
LST075
LST100
LST150
see Fig. 3
4
Watt (kW)
A (mm)
0.5 kW
688
0.75 kW
688
1.0 kW
688
1.5 kW
860
Advertisement
Table of Contents
