Table of Contents
Advertisement
Control Functions
The heater controls can be easily adjusted by using the six buttons
on the User Interface.
1. The Display Screen shows the options available at each stage
of adjustment.
2. Menu – displays the main options list;
Date/Time – Set the date and time.
Mode – Set the mode of operation.
Options – Temperature units, daylight savings time, lock settings and
service information.
3. BACK returns to the previous programming stage.
4. The
and
setting values. The
temperature on the main screen. The screen colour changes based on the
temperature selected, showing deep blue through to bright red.
5. ENTER is used within the menu options to confirm settings. On the main
screen pressing ENTER will display the enabled features.
6. The timed periods during which the heater is providing heat are defined as
'Comfort On' (this is displayed at the bottom of the screen).
Outside of heating periods the heater will not deliver heat and these periods
are called 'Comfort Off'.
While constant heat modes are active, the mode of operation is displayed at
the bottom of the screen e.g. 'Manual'.
7. The ADVANCE button overrides the heating settings and changes the
operational state of the heater. If a timer mode is active, pressing ADVANCE
will cause the heater to remain ON until the next OFF period is due, or OFF
until the next ON period is due.
If the heater is in a constant mode of operation, Advance can be used to
switch the appliance ON and OFF.
ADVANCE is also used to enter Boost mode. Boost mode delivers heat for
between one and four hours.
buttons are used to navigate through the menus and alter
and
button are also used to adjust the required room
11
Advertisement
Table of Contents
