Child Lock; User Information - Dimplex LST075 Operating Instructions Manual

Child Lock

To lock the controls press BACK and ENTER for three seconds. Child
Lock will appear at the bottom of the screen. To unlock the control repeat
the action of pressing BACK and ENTER for three seconds.
NOTE: The controls
cannot be adjusted when
child lock is active.

User Information

Press and hold Enter for five seconds to display the User Information
menu;
SP Range (set point) allows adjustment of the maximum temperature.
Open Window detection (OW). When enabled the appliance will reduce
the target room temperature to limit the energy wasted when a window
is opened.
Occupancy detection (OD) reduces the room temperature when the room
is unoccupied. Note: currently not available on this model.
EcoStart (ES) – to achieve the desired temperature at the onset of the
timed Comfort On period the appliance anticipates when it needs to start
heating prior to the onset of the timed 'on' period. E.g room is 16°C, with
21°C at 7am set on the timer. With ES on the control will start to heat the
room before 7am, reaching 21°C at this time. With ES off the heater will start
to heat the room at 7am and will reach 21°C after this time.
Factory reset returns all settings to the factory presets.
NOTE: Open Window
detection is enabled by
default. EcoStart control is
disabled by default.
Child Lock
User Info
SP Range
Open Window
Occupancy
EcoStart
Factory Reset
17