Table of Contents
Advertisement
Intermec ColorCoder 901 – Installation Instructions
CUTTER, cont'd.
Setting the Cut Interval
1
/. Intervals:
00000 will not be accepted.
00001 cuts after each copy.
00002 cuts after every second copy.
etc.
If the interval value exceeds the number
of copies in the batch, the cutter will cut
off the paper after the last printed copy.
Continuing from the previous page, proceed as follows. The display
panel shows:
OFF LINE
Press the <Menu> key.
1.
PAPER TYPE
Press the <Cursor right> key twice.
2.
PAPER SET.
Press the <Enter> key.
3.
PRINT PAGES SET.
Press the <Cursor right> key.
4.
CUT INTERVAL
Press the <Enter> key. The default value, or previously entered
5.
value, is displayed.
The default value "99999" cuts off the paper after the last copy
in the batch has been fed out.
CUT INT.
Press the <Cursor right> key. A cursor will appear under the
6.
first digit:
CUT INT.
The digit indicated by the cursor can be incremented one step at
7.
a time by pressing the <Menu> key and decremented by
pressing the <Enter> key. The cursor can be moved left or right
by means of the <Cursor left> and <Cursor right> keys
respectively. Set the value according to how many labels you
want to print before the cutter cuts off the paper
CUT INT. =00025
=99999
=99999
1
.
Continued!
8
Advertisement
Table of Contents
