Operations; Basic Operations - Clarion DXZ778RUSB Owner's Manual

Cd/usb/mp3/wma/aac receiver with cenet control
Table of Contents

Advertisement

5. OPERATIONS

Note:
• Be sure to read this chapter referring to the front diagrams of chapter "CONTROLS" on page ii (unfold).

Basic Operations

CAUTION
Be sure to lower the volume before
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
Selecting speaker system
When this product is turned on for the first time,
it allows you to select a speaker system.
Speaker system
Speaker
Speaker configuration
system
NORMAL
Front 2ch
Rear 2ch
(Normal)
3WAY
High 2ch
Mid 2ch
(3way)
2WAY
High 2ch
Mid 2ch
(2way)
Normal speaker system (NORMAL)
Front speaker
(left)
Rear speaker
(left)
Subwoofer
3way speaker system (3WAY)
Tweeter (left)
Front speaker
(left)
Subwoofer
Front speaker
(left)
1. Push the [SEEK PANEL] leftward or
Subwoofer 2ch
2. Press the [
3. Push the [SEEK PANEL] leftward or
Subwoofer 2ch
4. Press the [
Rear 2ch
Note:
• The first time this unit is turned on after the wire
Front speaker
(right)
Rear speaker
(right)
System check function
If you change your speaker system while the
power of this unit is on, perform the System
Tweeter (right)
check function to select the appropriate speaker
Front speaker
system again. See "Performing a system
(right)
check" (page 33) for details.
Select the speaker system suited to your
speaker configuration. Failing to do so can
damage your speakers.
2way speaker system (2WAY)
Tweeter (left)
Rear speaker
(left)
rightward to select the setting.
Each time you push the [SEEK PANEL]
leftward or rightward, the setting change in
the following order:
"NORMAL"
"3WAY"
"NORMAL"...
] button.
rightward to select "OK" or "CANCEL".
] button to store the
setting.
Refer to the section "Adjusting Sound Mode"
(page 13) and "Adjusting Sound Setting Mode"
(page 17).
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, "SYSTEM CHECK" appears in the
display, then the unit returns to the selecting
speaker system.
CAUTION
Tweeter (right)
Front speaker
(right)
Rear speaker
(right)
"2WAY"
11
DXZ778RUSB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents