Clarion DXZ778RUSB Owner's Manual page 33

Operations Common to Each Mode
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
The factory default setting is "OFF".
2-1. Select "BLINK LED".
3-1. Push the [P.CH] button upward or
downward to select "ON" or "OFF".
Setting the external amplifier
The factory default setting is "OFF".
2-1. Select "AMP CANCEL".
3-1. Push the [P.CH] button upward or
downward to select "ON" or "OFF".
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
Set the cellular phone connection
mode (AUX/CeNET)
You can listen to your telephone calls from the
speakers connected to this unit.
The factory default setting is "AUX".
2-1. Select "TEL SEL".
3-1. Push the [P.CH] button upward or
downward to select "AUX" or "CENET".
• AUX:
AUX input cable is for cellular phone audio
input. When the AUX input cable is used to
connect a AUX BLUETOOTH BB (BLT373)
(sold separately).
• CENET:
CENET input cable is for cellular phone
audio input. When a CeNET cable is used
to connect a cellular phone (BLT433 or
TEL-002) (sold separately).
Setting the car speaker output for the
cellular phone
The factory default setting is "R".
To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Select "TEL-SPEAKER".
3-1. Push the [P.CH] button upward or
downward to select "R" or "L".
• R:
Telephone calls can be heard on the front
right speaker connected to this unit.
• L:
Telephone calls can be heard on the front
left speaker connected to this unit.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
The factory default setting is "OFF".
2-1. Select "TEL-SWITCH".
3-1. Push the [P.CH] button upward or
downward to select the setting in the
following order:
"OFF" "ON"
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
When listening to your calls on your car
speakers, you can adjust the volume by
pushing the [P.CH] button upward or
downward.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
Performing a system check
2-1. Select "SYSTEM CHECK".
3-1. Press and hold the [
second or longer.
"SYSTEM CHECK" appears in the display,
then the unit returns to the speaker system
selecting mode.
AUX function
This system has an external input cable so you
can listen to sounds and music from external
devices connected to this unit.
Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
The factory default setting is "MID".
1. Press the [OPTION] button, "AUX SENSE
MID" appears in the display.
2. Push the [P.CH] button upward or downward
to select "LOW", "MID" or "HIGH".
"MUTE"
] button for 1
33
DXZ778RUSB