Error Displays - Clarion DXZ778RUSB Owner's Manual

8. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
ERROR P
ERROR R
ERROR 1
NO IPOD
ERROR 1
NO FILE
DSP ERROR
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
48
DXZ778RUSB
Cause
A CD is caught inside the CD
deck and is not ejected.
A CD cannot be played due
to scratches, etc.
A CD is loaded upside-down
inside the CD deck and does
not play.
A CD inside the CD changer
is not loaded.
A CD inside the CD changer
cannot be played due to
scratches, etc.
A CD inside the CD changer
cannot be played because it
is loaded upside-down.
A DISC inside the DVD
changer cannot be played.
A DISC cannot be played due
to scratches, etc.
A DISC inside the DVD
changer cannot be played
because it is loaded upside-
down.
Parental level error
Region code error
A communication error
occurs between the iPod and
the iPod CeNET Controller.
There is no iPod connected.
Device mechanism is
damaged.
USB memory device contains
no audio files.
USB connector is short-
circuited or USB memory
device is overloaded.
Measure
This is a failure of CD deck's mechanism and consult
your store of purchase.
Replace with a non-scratched, non-warped-disc.
Eject the disc then reload it properly.
This is a failure of CD changer's mechanism and
consult your store of purchase.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload it properly.
This is a failure of DVD mechanism and consult your
store of purchase.
Retry or replace with a non-scratched, non-warped-
disc.
Eject the disc then reload it properly.
Set the correct Parental level.
Eject the disc and replace correct region code disc.
Disconnect the iPod, then connect it again.
Please connect the iPod.
The unit's mechanism may be damaged. Consult
your dealer.
Insert USB memory device containing audio files.
Disconnect USB memory device, then hold [SRC]
button depressed to turn power OFF. Then press
[SRC] button once again to turn power ON.