Table of Contents
Advertisement
Periodic maintenance and adjustment
1. Ski runner wear limit
1
2
1. Ski wear limit
2. Ski runner
Ski runner wear limit:
FX10 6.0 mm (0.24 in)
FX10M53S 6.0 mm (0.24 in)
FX10M62S 6.0 mm (0.24 in)
FX10RTRS 8.0 mm (0.31 in)
FX10XT 8.0 mm (0.31 in)
Ski wear limit:
FX10 13 mm (0.5 in)
FX10M53S 24 mm (0.9 in)
FX10M62S 24 mm (0.9 in)
FX10RTRS 13 mm (0.5 in)
FX10XT 13 mm (0.5 in)
ECS00560
NOTICE
Avoid scratching the skis when loading
and unloading the snowmobile, when
riding in areas with little or no snow, or on
sharp edges such as concrete, curbs, etc.
This will wear or damage the skis.
70
To align the skis
1.
2.
1
TIP
Move the front tip of each ski fully inward be-
fore measuring or aligning.
3.
ESU12152
Steering system
Check the handlebar for excessive free play.
To check the handlebar
1.
2.
Turn the handlebar so the skis face
straight ahead.
Check the following for ski alignment:
Skis are facing forward.
G
Ski toe-out (distance A – distance B) is
G
within specification.
1. Distance A
2. Distance B
Ski toe-out (distance A – distance B):
0.0–15.0 mm (0.00–0.59 in)
If the alignment is not correct, consult a
Yamaha dealer.
Push the handlebar up and down and
back and forth.
Turn the handlebar slightly to the right
and left.
Advertisement
Table of Contents
