Remote Control; Inserting The Battery - Clarion DB265MP Owner's Manual

7. REMOTE CONTROL

If you buy the RCB-176-600 sold separately, you can enjoy the use of the Remote Control function.

Inserting the Battery

1 Turn over the remote control unit and slide the cover
in the direction indicated by the arrow in the
illustration.
2 Insert the battery (CR2025) into the insertion guides,
with the printed side (+) facing upwards.
3 Press the battery in the direction indicated by the
arrow so that it slides into the compartment.
4 Replace the cover and slide in until it clicks into place.
Notes:
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or
damage to surrounding materials. Always follow these
safety precautions:
• Use only the designated battery.
• When replacing the battery, insert properly, with +/–
polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
8
DB265MP
[ SRC ]
[ ], [ ]
[ MUTE ]
[ ISR ]
[ SCN ]
Signal transmitter
[ BND ]
[ ]
[ ], [
[ DISP ]
[ RDM ]
[ RPT ]
Insertion guide
]