Replacing the WLAN (Wireless Local Area Network) Module
1. Place and insert the WLAN module (A) into the mainboard connector (B)
(Figure
1-115).
Figure 1-115. Replacing the WLAN Module
2. Route the WLAN antennas through the cable guides (C)
3. Install and secure one (1) screw to the WLAN module
4. Connect the AUX antenna (white-color) to the WLAN AUX pin
5. Connect the MAIN antenna (black-color) to the WLAN MAIN pin
Figure 1-116. Replacing the WLAN Module
1-87
A
B
C
Machine Maintenance Procedures
(Figure
1-116).
(Figure
1-116).
(Figure
1-116).
(Figure
1-116).
AUX
MAIN
0